Showing 17–32 of 76 results
-
Automatic power factor correction with measurement of real power ,reactive power, apparent power
$115.39$103.37Automatic Power Factor Correction with measurement of real power, reactive power, and apparent power. Two zero crossing detectors are used for detecting zero crossing of voltage and current.
-
Automatic Star Delta Starter using Relays and Adjustable Electronic Timer for Induction Motor
$81.74$69.72The proposed project aims at providing low voltage to induction motors through star to delta conversion. Star Delta is basically used to lower the current rate applied to motor at start and after that full load current is applied.
-
Dc Motor Rotation In The Clock Wise And Anti Clock Wise Direction Using Rf Remote
$40.87$28.85DC Motors are commonly used in electronics and electrical projects. It may be a line-following robot, a remote-controlled car, electronic shutters and doors, digital locks, drones, and choppers, etc; the DC motors are used in a variety of applications. This project is a simple demonstration of remote controlling a DC motor by switching it on or off and changing the direction of its rotation clockwise or anticlockwise
-
DC MOTOR SPEED CONTROL USING 555 TIMER IC
$40.87$28.85This project is designed to control the speed of a DC motor using PWM control using 555 IC. The speed of the DC motor is directly proportional to the voltage applied across its terminals. Hence, if the voltage across the motor terminal is varied, then the speed can also be varied.
-
Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino
$114.19$106.98This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.
Nowadays There has been a very large increase in road accidents due to the drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today’s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.
There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle.
-
Ev Charging Station over iot electric vechicle Charging Station over iot
$126.21$114.19As we are aware about the mass adoption of EVs on the horizon, the smart electric vehicle charging will become essential for both the charging point network operators, and the National electricity grid. EVs are becoming popular across the globe. As the number of EVs increases, EV charging infrastructure will also be a basic need. This work is to make a smart application to know the different tariff rates of the grid by connecting to the grid.
-
FIRE FIGHTING ROBOT USING ARDUINO
$108.18$93.76Fire disaster is a common threat to lives and property. An automatic fire extinguishing strategy provides real-time monitoring, exploration, and programmed fire alarm. This projects presents the design of a low-cost, robust and secure fire protection system for buildings.
-
FOUR QUADRANT DC MOTAR SPEED CONTROL USING GSM
$90.15$76.93In this project, we are varying the speed of the DC motor (BLDC motor) by GSM sim 800 for transmitting the message for variation of speed (increasing or decreasing) using the Arduino Uno microcontroller using embedded C-programming. In various industries, the DC motor is found very common as its properties are very found in industrial applications such as high efficiency, high torque ratio, reliability.it is hard to operate in industries as it requires high maintenance that’s why we are using gsm sim to vary its speed as it’s very profitable and we can operate from long distance.
-
Four Quadrant DC Motor Controls without Microcontroller
$73.32$51.69The main intention of this project is to control the speed of a DC motor in alternative directions using speed control unit and to operate the motor in four quadrants: ie, clockwise, counter clock-wise, forward brake and reverse brake
-
Induction Motor Protection System Using Arduino
$114.19$102.17Today the most extensively used motor in the industry is the induction motor. The faults in the induction motor may lead to breakdown of the induction motor and an increase in expense to the industry. So in this project we have discussed a system which is cheap as compared to the other systems and also cost effective
-
INDUCTION MOTOR SPEED CONTROL AND DATA MONITORING OVER IOT
$209.15$180.30In this project we give a special idea of industrial automation, and fault monitoring. Induction motors are the nerves of many industries. Hence industrial automation is required for precise and accurate operation. The project Arduino-based parameter monitoring system for induction motor proposes a control and monitoring system for induction motor based on Arduino communication protocol for safe and economic data communication in industrial fields. The current, voltage, and temperature of the induction motors are very important parameters for its control system. The performance of an induction motor is directly affected by these fundamental quantities.
