SUN TRACKING SOLAR PANEL WITH STREET LIGHT CONTROL

Electrical Projects

Showing 177–192 of 218 results

  • 4.00 out of 5

    SUN TRACKING SOLAR PANEL WITH STREET LIGHT CONTROL

    5,900.00 5,500.00

    This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days.
    With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the Sun.

    Select options
  • 4.50 out of 5

    SUPER FAST ELECTRONIC CIRCUIT BREAKER

    7,500.00 5,000.00

    The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.

    Select options
  • 4.50 out of 5

    SUPER / ULTRA FAST ELECTRIC CIRCUIT BREAKER

    6,300.00 3,600.00

    The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.

    Select options
  • 4.20 out of 5

    Supply Selection Using Arduino

    13,300.00 12,200.00

    Inverters are widely used in the domestic as well as industrial environments to serve as the second line of source in case of power cut from the electricity utility grids. However, due to the low capacity of the battery, the inverter dies out with the use of heavy load appliances.

    Select options
  • 4.50 out of 5

    TACHOMETER USING 8051 MICROCONTROLLER

    6,800.00 5,700.00

    The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.

    Select options
  • 4.00 out of 5

    Temperature controlled load

    3,800.00 3,000.00

    This project is intended to develop a circuit to control a load automatically with a fixed temperature limit by using a thermistor sensor. Whenever the temperature increases beyond a certain limit, a lamp is switched off to bring the temperature to a normal value. Due to automatic switching on of the load, this system doesn’t require human involvement for monitoring the temperature of the load.

    Select options
  • 0 out of 5

    TEMPRATURE CONTROLLED FAN MONITORING SYSTEM

    6,400.00 5,400.00
    Select options
  • 4.60 out of 5

    THREE PHASE TRANSMISSION LINE FAULT DETECTION

    10,800.00 9,800.00

    The Electric Power System is divided into many different sections. One of which is the transmission system, where power is transmitted from generating stations and substations via transmission lines into consumers. Both methods could encounter various types of malfunctions is usually referred to as a “Fault”. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. Moreover, if a conducting object comes in contact with a bare power conductor, a short circuit, or fault, is said to have occurred.

    Select options
  • 5.00 out of 5

    THREE PHASE TRANSMISSION LINE FAULT DETECTION OVER GSM

    11,800.00 10,800.00
    Select options
  • 4.67 out of 5

    Three Phase Transmission Line Fault Detection Over IOT

    12,700.00 11,700.00

    The IOT base Transmission fault detection system can detect the fault when the line breaks down and it also shuts down the power supply through the faulty line until the operator shuts down the entire line once he confirms the fault. The system monitors the line fault in sequence for 3 lines namely R, Y, B Phases. Once if fault is detected the system sends the notification to the line monitoring station, it also provides the information about the faulty line and the distance at which the line is broken. The system is also capable of sending the line voltage to the monitoring station

     

    Select options
  • 4.40 out of 5

    Three Phase Transmission Line Fault Detection Over IOT Using ESP32

    12,700.00 11,700.00

    If we look at the present Transmission line fault detection system, there are several problems, few of which include lack of skilled labour, increased risks and also time consuming process. Automating a process is known to solve many or all of such problems faced in the conventional processes. This is one such attempt to create an easy and cost-effective solution which is applicable in the upcoming power transmission systems for Electricity providers and operators at various stages or stations.

    Select options
  • 4.67 out of 5

    Touch Sensor Base Dimmer

    5,500.00 4,000.00

    Red Light Emitting Diodes (LED) replaces HID lamps in street lighting system to include dimming feature. A Arduino is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs according to achieve desired operation.

    Select options
  • 4.80 out of 5

    TOUCHLESS ATTENDANCE SYSTEM USING ARDUINO

    15,800.00 14,000.00

    The application of biometric recognition in personal authentication enables the growth of this technology to be employed in various domains. The implementation of biometric recognition systems can be based on physical or behavioral characteristics, such as the iris,, fingerprint, and face. Currently, the attendance tracking system based on biometric recognition for education sectors is still underutilized, thus providing a good opportunity to carry out interesting research in this area. As evidenced in a typical classroom, educators tend to take the attendance of their students by using conventional methods such as by calling out names or signing off an attendance sheet.

    Select options
  • 4.80 out of 5

    TRAFFIC LIGHT PRIORITY CONTROL FOR EMERGENCY VAHICLE

    10,400.00 9,200.00

    Traffic congestion and transportation delay on urban requirements are increasing worldwide. Traffic signal is the significant issue to control traffic lights in vehicle systems. To improve the safety for both pedestrians and the vehicles Traffic signal is must. Emergency vehicles, like Ambulance have responsibility to reach patients or those who are met with accidents have to quickly transfer them to hospital. Due to traffic signals they may be delayed for rescue operations. define how traffic signal lights will detect emergency vehicles, how to manipulate the traffic light and how to provide free way to emergency vehicle.

    Select options
  • 4.67 out of 5

    Transformer Health Monitoring Over Iot And GSM

    14,000.00 11,500.00

    This project is about design and implementation of a mobile embedded system to monitor and record key parameters of a distribution transformer like load currents, Voltage and ambient temperature.

    Select options
  • 4.33 out of 5

    Transformer Health Monitoring

    7,350.00 6,350.00

    Transformers are a vital part of the transmission and distribution system. Monitoring transformers for problems before they occur can prevent faults that are costly to repair and result in a loss of service. The performance of prototype model developed is tested at laboratory for monitoring various parameters like transformer Over voltage and Under Voltage, Over current and Under current, Over temperature etc.

    Select options

Select your currency
×