Showing 17–32 of 189 results
-
Anti sleep alarm for drivers and vehicle control
₹6,800.00₹5,800.00This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed a eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of eye. On this device the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when eye blink sensor receives a signal from the transmission module.
-
ARDUINO BASED UNDERGROUND CABLE FAULT DETECTION
₹7,500.00₹6,200.00The objective of this project is to determine the distance of underground cable fault from base station in kilometers USING AN Arduino board. The underground cable system is a common practice followed in many urban areas. While a fault occurs for some reason, at that time the repairing process related to that particular cable is difficult due to not knowing the exact location of the cable fault. The proposed system is to find the exact location of the fault.
-
AUTOMATED ALCOHOL DETECTION AND ACCIDENT DETECTION VEHICLE
₹13,500.00₹12,200.00This tracking system generally use Global Positioning System or GPS Technology to locate each vehicle through SMS to the user number. Also the fuel level in the vehicle is also displayed on LCD. And the fuel level condition is send to android phone through GSM module. Vehicle Tracking application can be immensely useful for large and populated cities.
-
AUTOMATIC CLOTH DRYING SYSTEM USING PIC CONTROLLER OVER IOT
₹8,500.00₹7,200.00Drying of clothes in rainy season have become a domestic concern in recent years .In this proposed system we are continuously monitoring the area where we dry out our clothes especially when it’s raining and upload the data over IOT.
-
AUTOMATIC CONVEYER BELT FOR WATER FILLING
₹12,300.00₹9,800.00The main objective of this project is to develop a industrial automation system conveyer belt with water filling controlled by microcontroller. As technology is advancing so industries are also getting smarter. Modern industries are gradually shifting from conventional man power to centralized control system, involving controlled system. Presently, conventional water filling located in different parts of the industries makes it difficult for the user to go near to operate.
-
AUTOMATIC IDENTIFICATION OF ELECTRICITY THEFT
₹10,400.00₹9,400.00In proposed system automatic identification of electricity theft using arduino. If we implement the project for a complete network of a area which will be consuming a very huge amount of energy. Here we are using arduino board, LCD display, current sensor, buzzer. And here in this project we can calculate the energy or power transmitted by the KEB and the energy consumed by the network of area. If both transmitted power by the KEB and the consumed power by the area differ by a large value the arduino will display these difference in the power reading on the LCD and the buzzer located in the KEB starts beeping indicating theft of electricity. As total Power losses equals transmission power losses plus distribution power losses.
-
AUTOMATIC POWER FACTOR CORRECTION USING PIC- MICROCONTROLLER
₹8,400.00₹7,500.00In this proposed system, two zero crossing detectors are used for detecting zero crossing of voltage and current. The project is designed to minimize penalty for industrial units using automatic power factor correction unit. The PIC microcontroller used in this project .
The time lag between the zero-voltage pulse and zero-current pulse is duly generated by suitable operational amplifier circuits in comparator mode is fed to two interrupt pins of a microcontroller. The program takes over to actuate appropriate number of relays from its output to bring shunt capacitors into load circuit to get the power factor till it reaches near unity.
-
Automatic Solar Pannel Cleaning By Sensing Solar Voltage And Light Luminance
₹11,000.00₹9,400.00The solar PV modules are generally employed in dusty environments. The dust gets accumulated on the front surface of the module and blocks the incident light from the sun. It reduces the power generation capacity of the module. The power output reduces as much as by 50% if the module is not cleaned for a month.
-
Automatic Street Light Intensity Control Based On The IR Sensor Using Arduino
₹9,000.00₹7,800.00Nowadays the amount of power consumed by lighting and streets shares a major energy demand. The vehicles are passing over always and a part of places will be consisting of less dense areas and even no vehicle moments itself in few areas. But during the night all street lights will be on in a conventional street lighting system. To overcome this issue, proper energy-saving methods and lighting control are to be implemented.
