Showing 65–80 of 83 results
-
SPEED CHECKER TO DETECT RASH DRIVING ON HIGHWAYS
₹7,500.00₹5,000.00The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes. In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.
-
SPEED CONTROL OF INDUCTION MOTOR USING ACPWM
₹8,400.00₹7,400.00This project attempts a new speed control technique for the single-phase a.c. induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller.
-
SPEED CONTROL OF TWO INDUCTION MOTOR USING ACPWM
₹10,500.00₹8,600.00This project attempts a new speed control technique for the single-phase a.c. induction motor. It presents a design of a low-cost; high-efficiency drive capable of supplying a single-phase a.c. induction motor with a PWM modulated sinusoidal voltage. The circuit operation is controlled by an 8051 family microcontroller. The device is aimed at substituting the commonly used triac phase angle control drives. The circuit is capable of supplying a single-phase a.c. induction motor (or general a.c. inductive/resistive load) with varying a.c. voltage. The same as in triac control, the voltage applied to the load can be varied from zero to maximum value. On the other hand, it uses a pulse width modulation technique (PWM), and when compared with the phase angle control used for triacs, produces much lower high order harmonics.
-
STREET LIGHT THAT GLOWS ON DETECTING VEHICLE MOVEMENT
₹7,500.00₹5,000.00This project is designed to detect a vehicle movement on road to switch on only a block of street lights that are ahead of the vehicle, and to switch off the glowing lights when the vehicle passes away from the lights. This will help to save electrical energy.
-
Sun Tracking Solar Panel
₹13,000.00₹12,000.00In this project, LDR’s are working as light detectors. Before we go into detail, we will have to understand how the LDR’s work. LDR (Light Dependent Resistor) also known as photo resistor is the light sensitive device. Its resistance decrease when the light falls on it and that’s why it is frequently used in Dark or Light Detector Circuit. Check the various circuits based on LDR here.
-
SUN TRACKING SOLAR PANEL
₹7,500.00₹5,000.00This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days.
-
SUN TRACKING SOLAR PANEL WITH STREET LIGHT CONTROL
₹5,900.00₹5,500.00This project employs a solar panel mounted to a time-programmed stepper motor to track the sun so that maximum sun light is made incident upon the panel at any given time of the day. This is better compared to the light-sensing method that may not be accurate always – for example, during cloudy days.
With the impending scarcity of non-renewable resources, people are considering to use alternate sources of energy. Barring all the other available resources, the solar energy is the most abundant and it is comparatively easy to convert into electrical energy. The usage of solar panel to convert Sun energy into electrical energy is very popular, but due to the transition of sun from east to west, the fixed solar panel may not be able to generate optimum energy. The proposed system solves this problem by an arrangement for the solar panel to track the Sun. -
SUPER FAST ELECTRONIC CIRCUIT BREAKER
₹7,500.00₹5,000.00The project is designed to shut down a power supply when it is overloaded by using a super-fast electronic circuit breaker. The concept of electronic circuit breaker came into focus realizing that the conventional circuit breakers such as MCBs take longer time to trip. Therefore, for sensitive loads, it is very important to activate a tripping mechanism at the shortest possible time, preferably instantaneously.
-
SYNCHRONIZED TRAFFIC SIGNALS
₹12,500.00₹11,400.00The goal of this project is to develop a synchronized traffic signal system which can be used to synchronize the traffic signals at the junctions in the metropolitan cities wherein the green signal given at one traffic junction ismaintained at consecutive junctions through a serial communication.Vehiclesgetting the green signal at one junction move through the subsequent junctions as the green signals aremaintained throughout different junctions.
-
TACHOMETER USING 8051 MICROCONTROLLER
₹6,800.00₹5,700.00The main objective of this project is to avoid physical contact between the motor shaft and tachometer by using a non-contact tachometer in order to make it convinient, while measuring the speed of aBLDC motor.Also using standard contact type tachometer may not feasible in some applications.
-
ULTRASONIC BASE LIQUID LEVEL MEASURMENT
₹6,500.00₹5,800.00This report details the implementation of liquid level measurement system using ultrasonic waves. As the human ear audible range is in between 20 Hz to 20 kHz, it is insensitive to ultrasonic waves that falls beyond that range, and hence, the ultrasound waves can be used for applications in industries or vehicles without hindering human activity. They are widely used as range meters and proximity detectors in industries and also in the parking assistance systems.
-
ULTRASONIC BASED DISTANCE IN VOICE ON ANDROID PHONE
₹10,600.00₹6,000.00This report details the implementation of distance measurement system using ultrasonic waves. As the human ear audible range is in between 20 Hz to 20 kHz, it is insensitive to ultrasonic waves that falls beyond that range, and hence, the ultrasound waves can be used for applications in the project is to known the distance from obstacle to blind person.
