Description
The project is designed to control the direction of car jack by using a RF technology for remote operation with a transmitter and receiver. The direction of the DC motor is depending on signal which is coming from transmitter. Hence, if the relay1 & relay4 gets ON then the motor rotates in forward direction. And if relay2 & realy3 gets ON then the motor rotates in backward direction.
This project uses the above principle to control the direction of the jack by using RF module. At the transmitter side we are using encoder IC through which the signal is encoded and transmitted with the help of RF transmitter. At receiver side we are using decoder IC through which the signals are decoded coming from RF transmitter. At the transmitting end using push buttons, signals are sent to the receiver to control the direction of the jack and make it move forward / backward. An RF transmitter acts as a remote control that has the advantage of adequate range (up to 200 meters) with proper antenna. The receiver decodes the signals before feeding it to another DC motor via motor driver IC for necessary work. The motor driver IC is interfaced to the decoder IC for receiving signals and delivering desired output for direction control of the DC motor.
Furthermore, the project can be enhanced by using mobile phones we can control the direction of jack.
NOTE = Advance car jack controlled by RF wireless device is the project of last year’s engineering projects, BE final year engineering project. This project is used for the BE last year’s Mechanical and Electrical department students. This project is a Mechanical project. This project is Electrical department students.
Advance car jack controlled by RF wireless device is the project of a good price for the engineering projects. It is a very comparative engineering project. It is a very good BE final year project. It is a project for microcontroller based project.
The engineering projects give in the ELECTROSAL HI- TECH PVT.LTD. The best place for the degree final year engineering projects as well as for mechanical and Electrical students’ final year for the golden opportunity.
Advance car jack controlled by RF wireless deviceis an easy project and idea for the mechanical and electrical base students and 100% output is done.
HIGHLIGHTS
- The project is designed to control the direction of car jack by using a RF technology for remote operation with a transmitter and receiver.
- The direction of the DC motor is depending on signal which is coming from transmitter.
- At the transmitter side we are using encoder IC through which the signal is encoded and transmitted with the help of RF transmitter.
- An RF transmitter acts as a remote control that has the advantage of adequate range (up to 200 meters) with proper antenna.
- The motor driver IC is interfaced to the decoder IC for receiving signals and delivering desired output for direction control of the DC motor.
BLOCK DIAGRAM
HARDWARE REQUIREMENTS
- Micro-controller
- RF transmitter
- RF receiver
- Encoder
- Decoder
- 9 volt battery
- Transformer
- Rectifier
- Regulator
- Relay driver ic Uln 2003
- Relay
SOFTWARE REQUIREMENTS
- Keil uVision4
- Eagle
- proteus
Pavan Mali –
Very nice customer support team, the explanation with the documenatation were very useful and easy to understand
prarana yadav –
I have Order Do it Yourself kit of SOLAR BASED UPS project. The project having One ready made kit and another one PCB and their required components. So, i have got a great Experience. And also Practical Knowledge about this project. The Documentations clear all my Doubts and also video call support from the electrosal team.
electrosal –
I ordered this project for my final year project demo. When I was going for testing this project was worked very nicely. Thank you Electrosal for helping me.
electrosal –
It was a good experience with u.. the teaching staff’s are too good..they were nice and friendly with us..and got a good knowledge abt arduino and pcb designing
Alagkula mark –
I needed a electrical project for final year so I went for this project, the project was well tested also it is in plug and play condition. And it’s impressive as it gives almost accurate results.
Tanaji patankar –
A Typical day at work very competitve learned to never to take the objection of one call in to the next management was very encour again when was an off day the morel of the very work was the hards part of the job was tring the leards of the team form month to much the most enjoble part of my job three was the great bounes i received for over achivment
Madhure Kurane –
Very much dedicated , highly skilled team of engineers . Can get the required project at an affordable price in the promised time.
The most important part is after sale service which is very much admirable
Prathamesh Davari –
Highly skilled and experienced employees. Excellent and Innovative projects delivered/undertaken. Completely dedicated on doing quality products. Great to have a company in our region.
Godstime (Nigeria) –
A great level of detail and understanding from these guys. I come from a power background personally, so I struggled a little with an electronic based project. However, Electrosal made this seamless. Through, easy communication and extremely compotent professionals. Highly recommended thanks.
namita Kurabetti –
As a 3rd year diploma student, I was very pleased with this project. The package was delivered on time and in complete working condition.thank you Electrosal.
Nutan Hasure –
yesterday i received my ARDUINO BASED UNDERGROUND CABLE FAULT DETECTION project kit.. kit had all the components and parts as mentioned in component lists. Looking forward to start working on it.
Harika Boji –
Good project and best service