Code 240 LINE TO LINE LINE TO GROUND CABLE FAULT DETECTION OVER GSM.

The objective of this project is to determine the distance of underground cable fault from the base station in kilometers USING AN Arduino board. The underground cable system is a common practice followed in many urban areas. While a fault occurs for some reason, at that time the repairing process related to that particular cable is difficult due to not knowing the exact location of the cable fault. The proposed system is to find the exact location of the fault.  Users can get information about this fault via SMS on their mobile phones.

The project uses the standard concept of Ohms law i.e., when a low DC voltage is applied at the feeder end through a series resistor (Cable lines), then-current would vary depending upon the location of the fault in the cable. In case there is a short circuit (Line to Ground), the voltage across series resistors changes accordingly, which is then fed to inbuilt ADC of Arduino board to develop precise digital data for display in kilometers.

The project is assembled with a set of resistors representing cable length in KM’s and fault creation is made by a set of switches at every known KM to cross-check the accuracy of the same. The fault occurring at a particular distance and the respective phase is displayed on a LCD interfaced to the Arduino board. The GSM is used to send the SMS on the predefined number in the program.

Further this project can be enhanced by using a capacitor in an ac circuit to measure the impedance which can even locate the open-circuited cable, unlike the short-circuited fault only using resistors in DC circuit as followed in the above-proposed project.

Note

Line to line line to ground open cable fault detection this project for the good price for the engineering projects. It is very comparative engineering project. It is very good BE final year and Diploma projects. This project electronics departments as well as an electrical in final year students is use. This project is arduino based project for the last year engineering project for the electronics and electrical department students is use.

Line to line line to ground open cable fault detection is the project for the arduino based for the good project, excellent project for the BE last year engineering student is use for the electrical student is use.  This project for the competitive project in the BE last year engineering student for electronics and electrical  student in last year engineering student in the use .

The engineering projects give in the ELECTROSAL HI- TECH PVT.LTD. The best place of the degree and diploma final year engineering projects as well as for electronics student’s and electrical final year for the golden opportunity.

Line to line line to ground open cable fault detection it is the best projects for the electronics electrical , final year student is use  and idea for the electronics and electrical degree and diploma base students and 100% output is done.