Description
The project is designed for optimum energy management based on counter, light intensity and temperature sensor. The system also counts the number of persons entering and leaving the room and displays that information on LCD display. Depending on person’s entry as well as exiting condition the room appliances will play their role. The ultimate objective of this system is to save the energy as well as to design automatic room light controller by turning off all the appliances when nobody is there in the home.
In this project we are using arduino UNO, LDR sensor, DHT-11 sensor, IR sensors, LCD display, fan and lamp. There are two pair sensors, each kept at certain distance from the other. One pair of sensor consists of a transmitter and a receiver, kept exactly opposite to each other. The transmitting part emits modulated IR light which is received at the receiver end and fed to a microcontroller of arduino UNO family. When a person enters the room arduino senses it (with the help of IR sensors) and increments the count and displays it on LCD. If LDR sensor is in dark condition then the lamps of room gets ON. This system possesses two sets of IR LED and IR sensors to detect the persons entering and leaving the room. So if the person goes outside of the room then the lamp will get OFF.
Similarly, when temperature sensor sensed the temperature then the signal goes to the arduino board and through arduino board the fan gets ON. If nobody is present in the room then it will sensed by arduino and it will turn off the fans.
This helps in saving lot of energy.
Further the project can be enhanced by using timer arrangement in the project so that if the load switching doesn’t take place for some reason as desired, then timer would complete the task after prefixed time.
Note add-
Optimum energy management based on counter,light intensity and temperature sensorthis project for the good price for the engineering projects. It is very comparative engineering project. It is very good project BE power electronics project student is use. For the project is the embedded base project and core electronics base project.
Optimum energy management based on counter,light intensity and temperature sensorbased project for the good project, excellent project for the BE last year engineering student
The engineering projects give in the ELECTROSAL HI- TECH PVT.LTD. The best place of the degree and diploma final year engineering projects as well as electrical student is use. This project is power electronics based project and microcontroller based project.
Optimum energy management based on counter,light intensity and temperature sensorthe best projects of the electronics ,in final year student is use and idea for the and degree and diploma base students and 100% output is done.
HIGHLIGHTS
- The project is designed for optimum energy management based on counter, light intensity and temperature sensor.
- There are two pair sensors, each kept at certain distance from the other.
- If LDR sensor is in dark condition then the lamps of room gets ON.
- Similarly, when temperature sensor sensed the temperature then the signal goes to the arduino board and through arduino board the fan gets ON.
- This helps in saving lot of energy.
BLOCK DIAGRAM
HARDWARE REQUIREMENTS
- Arduino UNO
- DHT-11 sensor
- Ldr sensor
- LCD displahy
- Fan & lamp
- Transformer ,
- Voltage regulated circuit ,
- Relay ,
SOFTWARE REQUIREMENTS
- Aurduino: programming language
- Eagle
- proteus
Mantesh mukund –
I purchased a project from electrosal website page as it was suggested by my friend. I was very much satisfied with support and I have taken support through what’s app and video call from technical team I will suggest to my friend thank you Electrosal.
Ajay gawali –
Very nice customer support team. The project also worked in good condition.
Anita Nikam –
I saw this project video on youtube and desided to purchase this kit. I got this kit in time with in good condition. With the help off eplanatory video I can understand all concepts easily.
Pramod Nilekar –
i ordered ARDUINO BASED UNDERGROUND CABLE FAULT DETECTION project kit and it works like magic, I have learned so much from this kit, these guys are too good at electronics.
Sapana Kharade –
yesterday i received my ARDUINO BASED UNDERGROUND CABLE FAULT DETECTION project kit.. kit had all the components and parts as mentioned in component lists. Looking forward to start working on it.
Namrata Ghatage –
As a 3rd year diploma student, I was very pleased with this project. The package was delivered on time and in complete working condition.thank you Electrosal.
Manisha Deshmukha –
Well i got the ARDUINO BASED UNDERGROUND CABLE FAULT DETECTION project and i was surprised to see it delivered in such a good condition. I was afraid that sending a delicate circuit in through international shipping may damage it, but their packaging is extremely good.
Muntasir (Bangladesh) –
I Hired the hanayman conneection to assemble a disk for me the in home free estimate wss convenient and easy jos assembled my desk and went above and beyound i am so happy with the result and next time i have a project that reqaires a carpenter i will ask for him agin jos supper nice effeient and i felt making com fortable wiht him in my home he was very sweet to my two over friendly cast thank you joe for making my life easier
phoolan Mullah –
Very much dedicated , highly skilled team of engineers . Can get the required project at an affordable price in the promised time.
The most important part is after sale service which is very much admirable
Sana Darveshi –
It was a good experience with u.. the teaching staff’s are too good..they were nice and friendly with us..and got a good knowledge abt arduino and pcb designing
Harshada pilagavkar –
A great level of detail and understanding from these guys. I come from a power background personally, so I struggled a little with an electronic based project. However, Electrosal made this seamless. Through, easy communication and extremely compotent professionals. Highly recommended thanks.
Rutherford Hayes –
Electrosal Hi Tech pvt Ltd is one of the project centre. They provide practical based knowledge of project. Electrosal team are very good and experienced. Thanks electrosal.
Sidhart Kagalkar –
A widely-used classification of high-technological manufacturing industries is provided by the OECD.[5] It is based on the intensity of research and development activities used in these industries within OECD coutries, resulting in four distinct categories.
Vilas Ingale –
Great place.
The place where you can change your ideas in real working prototypes & machines.
It is one of your project manufacturing small scale industry in the area.
Swati Khavare –
The project quality was very good, I like the way they provide all system development videos along with the kit. I had ordered the AUTOMATIC POWER FACTOR CORRECTION USING ARDUINO kit & am happy to have ordered from here.. no issues at all
Harshada Rane –
Good project and best service
Govind Tarale –
Highly skilled and experienced employees. Excellent and Innovative projects delivered/undertaken. Completely dedicated on doing quality products. Great to have a company in our region.
Jeff Johnson –
A Typical day at work very competitve learned to never to take the objection of one call in to the next management was very encour again when was an off day the morel of the very work was the hards part of the job was tring the leards of the team form month to much the most enjoble part of my job three was the great bounes i received for over achivment
Uvaraj Kole –
Very Good
Faizan Jamadar –
The project quality was very good, I like the way they provide all system development videos along with the kit. I had ordered the AUTOMATIC POWER FACTOR CORRECTION USING ARDUINO kit & am happy to have ordered from here.. no issues at all
Varsha Bharat –
My friend told me of these kind of kits available at electrosal.com and i ordered the FINGERPRINT BASE BIKE START project. the system is just amazing use of technology. Their tutorials and online support provide sufficient practical knowledge.
Ashok Chavan –
The online explanation system for my software project kit was wonderful. I saw it 3 times and once again before my final presentation, gave me detailed knowledge of the opinion mining project I bought.
Pushpa Patil –
Nice Project
Girish Kadam –
The online explanation system for my software project kit was wonderful. I saw it 3 times and once again before my final presentation, gave me detailed knowledge of the opinion mining project I bought.
Vedant Patil –
The project quality was very good, I like the way they provide all system development videos along with the kit. I had ordered the AUTOMATIC POWER FACTOR CORRECTION USING ARDUINO kit & am happy to have ordered from here.. no issues at all