Showing 257–272 of 370 results
-
SMART ROAD CROSSING INDICATOR OVER IOT
₹9,500.00₹7,300.00The main objective of this project is to develop a “SMART ROAD CROSSING INDICATOR OVER IOT”. The number of accidents happened in India. And this rate is highest in the world. The actual number of accidents may be higher than documented. One person dies in every 4 min.
In India nowadays safety on roads has become a serious issue as well as all over in the world. At some places accidents occur like crossings, diversions on highways. So we are developing this project to reduce the problems occurred while crossing the roads. -
SMART SOLAR PANEL CLEANING ROBOT
₹14,500.00₹13,500.00The Solar energy is the most abundant source of energy for all the forms of Life on the planet Earth. Solar is the basic source of renewable energy. One can generally assume a reduction of about 40% – 55%, if the panels are not clean properly for 1-2 months. It is the proposed to develop a Solar Panel Cleaning System which remove the dust on the surface on a regular basis and maintain the plant output.
-
SMART VILLAGE CONTROL SYSTEM OVER IOT
₹13,500.00₹12,000.00Keeping the village clean has been always an on-going task which needs laborious efforts of people working on ground level emptying the garbage bins whenever they are full. The event of garbage bin getting full is not strictly dependent on a time pattern, instead it sometimes becomes rapidly full or sometimes requires more than normal time to become full. Smart village control system over IOT with GSM project is an innovative step towards making this process more smooth and efficient.
-
SMOOTH OR SOFT START OF SINGLE PHASE INDUCTION MOTOR
₹5,450.00₹4,450.00The main intention of this project is to provide protection for a single-phase pump motor by applying initial voltage gradually from low to high for obtaining soft start. The pump motor draws more current than its rated capacity during their starting condition which may lead to the damage of the windings of the motor. In order to avoid this problem, applied voltage is gradually increased from low to high so that the soft start of the pump motor is performed.
-
SOFT START OF INDUCTION MOTOR USING ACPWM
₹8,400.00₹5,800.00This project attempts a soft start control technique for the single-phase a.c. induction motor. The circuit operation is controlled by an 8051 family microcontroller. The drive uses a PWM controlled MOSFET and the load in series with a bridge rectifier. The device attempted here takes advantage of both the low price of the phase angle control and the low harmonic content and high efficiency that we can get with standard converter topology.
-
Soft Start of Three Phase Induction Motor
₹8,000.00₹7,600.00The project is designed to provide a soft and smooth start to a 3 phase induction motor. The three phase induction motor during the initial starting condition draws up much higher current than its capacity and the motor instantly reaches the full speed. This results in a mechanical jerk and high electrical stress on the windings of the motor.
-
SOIL MOISTURE SENSING USING MICRO-CONTROLLER
₹9,000.00₹5,800.00The project is designed to develop an automatic irrigation system that switches a pump motor on or off. In the field of agriculture, use of proper method of irrigation is important. The advantage of using this method is to reduce human intervention and still ensure proper irrigation.
-
SOIL MOISTURE SENSOR BASE IRRIGATION OVER GSM
₹9,000.00₹6,300.00The main objective of this project is to sense the moisture condition of soil through a sensing arrangement to switch a motor pump automatically off when the soil is in wet condition. Avoiding human intervention is the biggest advantage of this project and we want know condition of motor make call to saved number, gsm module replay sms through status of motor.
-
SOIL MOISTURE SENSOR BASE IRRIGATION SYSTEM USING PIC MICROCONTROLLER
₹6,000.00₹5,000.00The main objective of this project is to sense the moisture condition of soil through a sensing arrangement to switch a motor pump automatically off when the soil is in wet condition. Avoiding human intervention is the biggest advantage of this project.
-
Soil Nutrient Monitoring Over IOT
₹19,400.00₹18,000.00Agriculture, the backbone of our country nowadays is facing a number of challenges. Our system is designed to provide a solution that is one step forward toward agricultural growth. Using IoT, an attempt is made to automate irrigation. Farmers face some difficulties in switching on/off the motor. Any delay in watering may reduce production. In this context, we propose an “IoT Based Soil Analysis and Irrigation System” to help the farmer in reducing human effort and increasing the yield. The farmer can control the power of the motor even at distance.
The proposed system is used to determine the nutrient quantity of soil. As we know all the nutrients are present in the soil but what amount of nutrients are available in that particular field we can’ figure out. For this project, we can use the test bench to recognize the type of soil that is good to grow the crop. On the basis of the study, it is concluded that there are 3 types of soil available and they are all uveal soil, red soil, and black soil.Everysoilhasdifferentmicronutrient.Buttomeasuretheamountofnutrientavailableinthesoilwearegoingtodesigndeviceorinstrumentwhichgivesusproperreading of micronutrient. Followingarethemainobjectives oftheproposedsystem
- Design and develop an Arduino-based sensor interfacing for reading soil parameters.
- Buildainterfacebetween LCDandmicrocontrollerto showthesensorreadings
- Convertingthesensor value usingADCport of Arduino.
- Establishing the cloud server connectivity in order to store all soil test records over the server with time and GPS location stamps.
-
SOIL PH CONTROLLED IRRGATION SYSTEM BASED ON IOT
₹10,000.00₹9,800.00In this processed system we are discussed about the ph control system using arduino. In this project we are used arduino board, LCD display, PH sensor, soil moisture sensor, power supply, relays and 3pumps. Also we are using ESP8266 module and it is required 3.3v supply. In this project we are taken 3 containers. So when ph is less than 7 then the solution is acidic. When the solution is normal then it is equal to 7 so it is ready for irrigation. And when the ph of solution is more than 7 then it is called alkaline solution.
