Showing 97–112 of 351 results
-
DEVELOPING AN ISLANDING ARRANGEMENT FOR GRID ON SENSING BAD VOLTAGE/ BAD FREQUENCY
₹7,800.00₹6,400.00The project is designed to develop an islanding arrangement for grid on sensing bad voltage/ bad frequency. There are several power generation units connected to the grid such as hydro, thermal, solar, wind etc. to supply power to the load. In modern power system, electrical energy from the generating station is delivered to the ultimate consumers through a huge network of transmission and distribution. These generating units need to supply power according to the rules of the grid. Thus, for satisfactory operation of loads, it is desirable that consumers are supplied with substantially constant voltage and frequency.
-
Diesal Generator Body Leakage Current Measurment And Auto Switching Based On Leakage Current
₹9,500.00₹8,400.00The emergency diesel generators in a nuclear power plant have an important safety function-supplying emergency electrical power to maintain cooling and other vital functions. The research reviewed in this article addresses the safety implications of aging of these emergency diesel generators and the influence of aging on their reliability. Historical operational information was assembled on component and system failures and their causes. One significant research result is that the fast-starting and fast-loading test procedure mandated by Regulatory Guide 1.108 and the standard Technical Specifications has contributed to wear and degradation. Other equally important aging and degradation factors for the diesel generators are identified and reviewed. A new approach developed represents a more balanced aging management program that includes (1) slow-start testing during which operating parameters are monitored.
(2) Analysis of data trends,
(3) Training.
(4) Maintenance.
This approach should improve safety by identifying aging degradation that leads to fitture diesel generator failures. Timely maintenance could then prev*ent actualJafiures.
-
DISH POSITIONING CONTROL BY ANDROID PHONE
₹8,000.00₹5,200.00The project is designed to develop a dish positioning system which can be operated by using a conventional android phone. The main application of using a dish is to receive signal from satellites and other broadcasting sources. In order to position the dish to the exact angle to receive the maximum signal of a particular frequency, it needs to be adjusted manually
-
Driver Safety System Using Sensors Like Eye Blink, Alcohol, Temperature, Smoke, Accident Prevention, Using Arduino
₹9,500.00₹8,900.00This aims to create a framework to keep the car safe and secure through critical activity. When we run in ignorance we cannot take care of our own. If we make all vehicles with an automatic safety system that gives the driver a high level of protection, an alarm will also be issued. The device has an installed eye blink sensor. Once the driver has started the engine, the sensors automatically detect the blink of an eye. On this device, the output of the sensor is provided for comparison with ARDUINO. When the value reaches the set level, the buzzer automatically vibrates, the LED glows, and the car stops automatically when the eye blink sensor receives a signal from the transmission module.
Nowadays There has been a very large increase in road accidents due to the drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. Driver in-alertness is an important cause of most accidents related to vehicle crashes. Driver fatigue resulting from sleep deprivation or sleep disorders is an important factor in the increasing number of accidents on today’s roads. A drowsy driver warning system can form the basis of the system to possibly reduce the accidents related to driver drowsiness. This project can generate a model which can prevent such accidents. To prevent this, we outlined a very simple and economical system that deals with this issue. In this project, when a driver falls asleep, an alarm is raised to warn the driver attached to the rear of the vehicle. The alarm continues for a minimum of 10 seconds so that the driver wakes and gets ready to steady the vehicle he drives. Thus we can control major accidents.
There has been a very large increase in road accidents due to drowsiness of drivers while driving which leads to enormous fatal accidents. The driver loses control when he falls asleep which leads to an accident. This is because when the driver is not able to control his vehicle at a very high speed on the road. This project can generate a model which can prevent such accidents. Temperature sensors and smoke sensors are used for further safety systems in the vehicle.
-
EARTHQUAKE DETECTION & IT’S MONITORING OVER IOT
₹10,800.00₹9,000.00In this processed system, we are monitoring the earthquake, if any vibration/ tilt of the earth’s surface takes place; the system will alert us and send the data over IOT page. So to avoid the life loss and economic loss we are developing this device.
In this project we are using Arduino board i.e. the heart of project, 2-vibrator sensor, 2-accelerometer, LCD display. An accelerometer is an electromechanical device used to measure acceleration forces and also for sensing vibrations in systems or for orientation applications. So when some orientation according to x-axis, y-axis or z-axis happens to the earth’s surface then it will display a message on LCD that there is Earthquake. And also sends data on IOT page through Wi-Fi module.
-
ELECTRIC LINE MAN SAFETY WITH PASSWORD BASED CIRCUIT BREAKER
₹7,400.00₹6,400.00The project is designed to control a circuit breaker by using a password for the safety of electric man. Critical electrical accidents to line men are on the rise during electric line repair due to lack of communication and co-ordination between the maintenance staff and electric substation staff.
-
Ev Charging Station over iot electric vechicle Charging Station over iot
₹10,500.00₹9,500.00As we are aware about the mass adoption of EVs on the horizon, the smart electric vehicle charging will become essential for both the charging point network operators, and the National electricity grid. EVs are becoming popular across the globe. As the number of EVs increases, EV charging infrastructure will also be a basic need. This work is to make a smart application to know the different tariff rates of the grid by connecting to the grid.
-
FACE DETECTION BASED ATTENDANCE SYSTEM BY IMAGE PROCESSING USING RASPBERRY-PI OVER IOT
₹21,000.00₹19,000.00In proposed system face detection based attendance system by image processing using raspberry-pi. We have used image processing concept to detect each and every student is present or not. Face recognition system is widely used for human identification due to its capability to measure and subsequently identifies human identification. Open CV/ Python library is formulated as given images of a scene identify or verify one or more persons in the scene using a stored database of faces. Thus, the images are extracted and allowed to match with the database images. If the images are matched, then it will sends the image to the an email id. So this image of the person can be viewed by online user.
